LIFETEK
24V 200Ah Stackable LiFePO4 Battery
24V 200Ah Stackable LiFePO4 Battery
SKU:24V200ASTACK
Couldn't load pickup availability
π VanLiFe 24V 200Ah Stackable Lithium Battery
LiFePO4 25.6V | 250A BMS | Stackable Steel Case | Australian Built
The VanLiFe 24V 200Ah Stackable Lithium Battery is a high-capacity power solution designed for serious 24V off-grid, caravan, marine, commercial, and backup power systems.
With 250A continuous charge and discharge capability, automotive-grade IEC 62619 certified cells, laser-welded bus bars, and a sealed powder-coated steel enclosure, this battery is built for demanding applications where reliability, safety, and performance matter.
Designed and hand built in Australia, each battery is individually quality checked and tested twice before dispatch.
β‘ Key Features
π 200Ah 24V Lithium Capacity
Delivers serious usable power for large 24V setups, including off-grid solar, inverters, appliances, tools, lighting, pumps, and mobile power systems.
β‘ Suitable for 5000W Inverter Systems
Capable of powering high-demand inverter setups when correctly installed with suitable cabling, fusing, and charging equipment.
π 250A Continuous Discharge
Built for heavy-duty 24V loads and demanding power applications.
π 250A Continuous Charge Capability
Supports fast charging from compatible lithium chargers, solar systems, and DC-DC charging setups.
βοΈ Active + Passive Cell Balancing
Helps maintain cell health, improve charging efficiency, and support long-term battery reliability.
π© Laser-Welded Bus Bar Connections
Strong, reliable high-current connections directly to the cell pack.
π« Cable-Free Internal Construction
Reduces internal failure points while improving durability and reliability.
π‘οΈ Stackable Steel Enclosure
Sealed zinc-plated and powder-coated steel case with integrated mounting holes for secure installation and stacking.
π AS/NZS3001.2:2022 Installation-Focused Design
Includes vent outlet plus high/low temperature, voltage, and over-current protection features required for modern installation standards.
π₯ Built for High-Demand Applications
The VanLiFe 24V 200Ah Stackable Battery is ideal for running:
β Large inverters
β Caravan power systems
β Fridges and freezers
β Induction cooking
β Coffee machines
β Pumps and lighting
β Solar storage systems
β Backup power systems
β Off-grid touring setups
β Mobile business power systems
π BMS Protection Specifications
| Protection Feature | Specification |
|---|---|
| BMS Continuous Discharge | 250A |
| BMS Continuous Charge | 250A |
| Over-Current Protection | 270A for 10 seconds |
| Reset Time | 35 seconds |
| Low Voltage Shutdown | 20V |
| Low Voltage Restart | 21V |
| High Voltage Charge Disconnect | 30V |
| High Voltage Restart | 29.6V |
π‘οΈ Temperature Protection
| Protection Type | Disconnect | Reset |
|---|---|---|
| Low Temp Charge | 1Β°C | 2Β°C |
| Low Temp Discharge | -20Β°C | -15Β°C |
| High Temp Charge | 55Β°C | 50Β°C |
| High Temp Discharge | 60Β°C | 55Β°C |
π Charging Profile
For best performance, use a compatible 24V lithium charger with the following settings:
- Bulk Charge: 28.4V β 29.2V
- Ideal Bulk Charge: 28.8V
- Absorption: 28.4V β 29.2V
- Ideal Absorption: 28.8V
- Float: 26.8V β 27.2V
- Ideal Float: 27.0V
π Long Cycle Life
The automotive-grade cells used in this battery are designed to withstand 3000 cycles at 80% depth of discharge under heavy electric vehicle use.
That means daily cycling from full charge down to 20% state of charge would take approximately 8.2 years to reach 3000 cycles. In lighter applications such as caravan, RV, marine, and storage systems, service life may be even longer.
π Technical Specifications
| Specification | Details |
|---|---|
| Battery Chemistry | LiFePO4 Lithium |
| Nominal Voltage | 25.6V |
| System Suitability | 24V systems |
| Capacity | 200Ah |
| Approx Energy | 5.12kWh |
| BMS Continuous Discharge | 250A |
| BMS Continuous Charge | 250A |
| Terminal Size | M10 |
| Vent Outlet Thread | 1/2 inch male BSP |
| Cell Certification | IEC 62619 |
| Case Material | Zinc-plated, powder-coated steel |
| Internal Construction | Cable-free |
| Bus Bar Connection | Laser-welded |
| Weight | 48kg |
| Design | Stackable with mounting holes |
| Build Location | Australia |
π Dimensions
- Length: 438mm
- Width: 420mm
- Height: 153.4mm
ποΈ Ideal Applications
π Caravans & motorhomes
βοΈ 24V off-grid solar systems
β΅ Marine power systems
π Commercial vehicles
π Remote touring setups
π High-output inverter systems
π‘ Backup and storage power systems
βοΈ Industrial and mobile power applications
β Why Choose the VanLiFe 24V 200Ah Stackable?
β High-capacity 24V lithium power
β Supports serious inverter systems up to 5000W
β Powerful 250A continuous charge and discharge capability
β Active and passive cell balancing
β Automotive-grade IEC 62619 certified cells
β Laser-welded bus bar construction
β Cable-free internal design
β Rugged sealed steel enclosure
β Stackable design for expandable systems
β Designed and hand built in Australia
β Individually QC checked and tested twice
β 7 + 3 year warranty with after-warranty repair service available
π Build a Stronger 24V Power System
Upgrade to the VanLiFe 24V 200Ah Stackable Lithium Battery and power your system with high-capacity, high-output lithium performance built for demanding off-grid and mobile applications.
Share

SS - Product Addons
Select product(s) to see addons appear.
This message only appears in theme editor.