6V 200Ah Deep Cycle AGM Battery (DC200-6)

🔋 FULLRIVER DC200-6 DEEP CYCLE AGM BATTERY

6V 200Ah Group 27 Deep Cycle AGM Battery – M8 Terminals, 400-Minute Reserve Capacity & Ultra-Low Internal Resistance

⚡ Heavy-duty high-capacity deep cycle power with exceptional reserve capacity, sealed AGM construction and maintenance-free performance.

The Fullriver DC200-6 is a premium 6V 200Ah Deep Cycle AGM battery engineered for demanding cyclic power applications where substantial stored energy, dependable repeated discharge and recharge, and long service life are essential.

Part of Fullriver’s trusted DC Series, the DC200-6 uses robust internal construction, heavier plates and increased lead content to support strong cycling performance, substantial reserve capacity and consistent power output.

With 200Ah capacity, exceptional reserve ratings of 400 minutes at 25A and 100 minutes at 75A, plus an ultra-low 1.40mΩ internal resistance, the DC200-6 is a strong choice for compatible golf car, floor-cleaning, caravan, marine, backup, solar, off-grid and multi-battery bank applications.

---

⚡ KEY FEATURES

🔋 6V Deep Cycle AGM Performance
Designed for dependable cyclic power in compatible 6V systems and correctly configured multi-battery banks.

⚡ 200Ah Capacity at 20HR Rate
Provides substantial stored energy for demanding deep cycle, auxiliary and battery-bank applications.

⏱️ 400-Minute Reserve Capacity at 25A
Provides exceptional reserve-energy performance for compatible electrical loads.

💥 100-Minute Reserve Capacity at 75A
Demonstrates strong stored-energy capability even under significantly heavier discharge loads.

⚡ Ultra-Low 1.40mΩ Internal Resistance
Supports efficient energy transfer and dependable current delivery in compatible deep cycle applications.

🔁 Built for Repeated Cycling
Fullriver DC Series construction uses heavier plates and increased lead content to support reserve capacity and long cycle life.

🔒 Sealed AGM Construction
Absorbed Glass Mat technology provides clean, dependable and non-spillable operation under normal conditions.

🛠️ Maintenance-Free Design
No routine electrolyte top-ups are required under normal operating conditions.

📦 Group 27 Case Size
Uses a Group 27 battery format for compatible equipment and battery-bank installations.

🧯 Flame-Resistant ABS Case
Durable ABS plastic housing with a UL94-HB flame-resistance rating.

🔌 M8 Terminal Connections
Provides secure electrical connections for compatible high-capacity deep cycle systems.

---

🔋 BUILT FOR TRUE DEEP CYCLE USE

The Fullriver DC200-6 is designed primarily for applications where the battery is repeatedly discharged and recharged during normal operation.

Its 200Ah capacity at the 20-hour rate provides substantial stored energy for compatible golf cars, cleaning equipment, recreational vehicles, marine auxiliary systems, backup systems and off-grid battery banks.

Unlike a dedicated starting battery, the DC200-6 is engineered around sustained energy delivery and repeated cycling rather than short-duration engine cranking.

⚠️ IMPORTANT: No dedicated CCA or CA / MCA rating has been supplied for the DC200-6. It should not be selected as an engine-starting battery unless the equipment manufacturer specifically confirms suitability.

---

💪 FULLRIVER DC SERIES CONSTRUCTION

The DC200-6 forms part of Fullriver’s DC Series of deep cycle AGM batteries.

The series uses heavier plates, increased lead content and carefully matched internal construction to support dependable cycling performance, strong reserve capacity and long service life.

This heavy-duty construction makes the DC200-6 well suited to applications where repeated energy delivery and dependable operation are required.

---

🔒 SEALED AGM TECHNOLOGY

The DC200-6 uses Absorbed Glass Mat technology to retain electrolyte within the internal battery structure.

This sealed construction provides maintenance-free operation and eliminates routine fluid top-ups under normal operating conditions.

Its non-spillable AGM design makes it a practical choice for compatible mobile, commercial, marine, standby and auxiliary power installations.

---

⏱️ EXCEPTIONAL RESERVE CAPACITY

The DC200-6 provides substantial reserve-energy performance across different load levels.

• Reserve capacity at 25A: 400 minutes
• Reserve capacity at 75A: 100 minutes

These ratings provide an additional indication of the battery’s available stored energy alongside its amp-hour capacity.

---

📊 MULTIPLE CAPACITY RATINGS

The DC200-6 provides different capacity figures depending on the discharge rate.

• Capacity at 5HR rate: 165Ah
• Capacity at 20HR rate: 200Ah
• Capacity at 72HR rate: 212Ah
• Capacity at 100HR rate: 220Ah

These ratings provide useful guidance for expected battery performance across different load and discharge conditions.

---

⚡ ULTRA-LOW INTERNAL RESISTANCE

The DC200-6 has a specified internal resistance of approximately 1.40mΩ.

This supports efficient energy transfer and dependable performance across compatible deep cycle, auxiliary, standby and battery-bank applications.

---

🔋 IDEAL FOR MULTI-BATTERY BANKS

As a 6V battery, the DC200-6 can be incorporated into correctly designed higher-voltage battery banks by connecting matched batteries in series.

For example, two matching 6V 200Ah batteries connected in series create a nominal 12V 200Ah battery bank.

Four matching 6V batteries connected in series can create a nominal 24V 200Ah bank, provided the complete electrical system is designed for that configuration.

Parallel strings may also be used in properly engineered systems where additional amp-hour capacity is required.

⚠️ IMPORTANT: Battery bank design must account for voltage, current, cable sizing, fusing, charging requirements and battery matching. For best system consistency, use batteries of the same model, chemistry, capacity, age and condition.

---

🔧 SUITABLE APPLICATIONS

• Golf cars and golf carts
• Floor cleaning machines
• Caravan and RV battery banks
• Marine auxiliary power systems
• Backup and standby power systems
• Deep cycle battery banks
• Solar power systems
• Off-grid power systems
• Commercial cyclic equipment
• Compatible 6V equipment
• Correctly configured 12V, 24V and higher-voltage battery banks

---

📐 PRODUCT SPECIFICATIONS

Brand: Fullriver

Model: DC200-6

Series: DC Series

Battery type: Deep Cycle AGM

Nominal voltage: 6V

Group size: 27

Capacity at 5HR rate: 165Ah

Capacity at 20HR rate: 200Ah

Capacity at 72HR rate: 212Ah

Capacity at 100HR rate: 220Ah

Cold Cranking Amps: N/A

Cranking Amps / Marine Cranking Amps: N/A

Reserve capacity at 25A: 400 minutes

Reserve capacity at 75A: 100 minutes

Internal resistance: 1.40mΩ

Case material: ABS plastic

Flame-resistance rating: UL94-HB

Terminal type: M8

Weight: Approximately 30.0kg

---

📏 DIMENSIONS

Length: 306mm

Width: 169mm

Case height: 220mm

Height including terminals: 226mm

---

📦 WHAT’S INCLUDED?

• 1 × Fullriver DC200-6 6V 200Ah Deep Cycle AGM Battery

---

⚠️ FITMENT & COMPATIBILITY INFORMATION

Please confirm the electrical, physical and charging requirements of your system before purchasing.

Check the required:

• Battery voltage – 6V
• Battery chemistry – AGM
• Battery capacity
• Group size – 27
• Physical dimensions
• Terminal type – M8
• Terminal orientation and polarity
• Charging profile
• Battery-bank voltage and configuration
• Cable sizing and circuit protection
• Available installation space
• Cyclic or standby application requirements

⚠️ IMPORTANT: This is a 6V battery. Do not connect it directly to equipment requiring 12V, 24V, 36V, 48V or another system voltage unless it forms part of a correctly configured multi-battery bank.

⚠️ IMPORTANT: Do not purchase based on capacity or Group 27 sizing alone. Physical dimensions, M8 terminal configuration, polarity, charging requirements and battery-bank design must also match your application.

---

❓ FREQUENTLY ASKED QUESTIONS

What type of battery is the Fullriver DC200-6?

The DC200-6 is a sealed 6V Deep Cycle AGM battery from Fullriver’s DC Series.

What is the capacity of the DC200-6?

The battery is rated at 200Ah at the 20-hour discharge rate.

What are the other capacity ratings?

The supplied specifications list 165Ah at the 5-hour rate, 200Ah at the 20-hour rate, 212Ah at the 72-hour rate and 220Ah at the 100-hour rate.

Is the DC200-6 a 6V or 12V battery?

The DC200-6 is a 6V battery. It can form part of a correctly configured multi-battery bank where a higher system voltage is required.

Can I use two DC200-6 batteries in a 12V system?

Yes. Two matching 6V DC200-6 batteries connected in series create a nominal 12V 200Ah battery bank.

Can I use four DC200-6 batteries for a 24V system?

Four matching 6V batteries can be connected in series to create a nominal 24V 200Ah bank, provided the charging system, cabling, circuit protection and connected equipment are designed for that configuration.

Does connecting two batteries in series increase amp-hours?

No. Series connection increases voltage while the amp-hour rating remains the same. Two 6V 200Ah batteries in series provide a nominal 12V 200Ah bank.

Does connecting batteries in parallel increase amp-hours?

Yes. Parallel connection can increase total available amp-hour capacity while maintaining nominal voltage, but multi-string battery banks should be correctly designed for balanced current sharing, charging and circuit protection.

Is the DC200-6 a deep cycle battery?

Yes. The DC200-6 is specifically designed for repeated cyclic discharge and recharge applications.

Can the DC200-6 be used for engine starting?

No dedicated CCA or CA / MCA rating has been supplied. The DC200-6 is designed primarily as a deep cycle AGM battery and should not be selected as a dedicated starting battery unless the equipment manufacturer confirms suitability.

What is the reserve capacity?

The DC200-6 provides approximately 400 minutes of reserve capacity at a 25A load and approximately 100 minutes at a 75A load.

What is the internal resistance?

The supplied internal resistance specification is approximately 1.40mΩ.

Why is low internal resistance useful?

Low internal resistance helps support efficient energy transfer and reduce voltage drop under electrical load, contributing to dependable deep cycle performance.

Is the DC200-6 maintenance-free?

Yes. Its sealed AGM construction means routine electrolyte top-ups are not required under normal operating conditions.

Is the DC200-6 non-spillable?

Yes. Its sealed AGM construction is designed to provide non-spillable operation under normal conditions.

Is the DC200-6 suitable for golf carts?

Yes, where the golf cart or golf car requires compatible 6V AGM deep cycle batteries with matching capacity, dimensions, terminal configuration and charging requirements.

Can the DC200-6 be used in a floor cleaning machine?

Yes, where the equipment requires compatible 6V AGM deep cycle batteries or a correctly configured multi-battery bank with matching specifications.

Can the DC200-6 be used in a caravan or RV?

Yes, where the electrical system is designed for compatible AGM batteries and the DC200-6 is used in the correct battery-bank configuration.

Is the DC200-6 suitable for marine auxiliary power?

It may be suitable for compatible marine auxiliary or house-bank applications where its voltage configuration, capacity, dimensions, M8 terminal arrangement and charging requirements match the system.

Can the DC200-6 be used for solar or off-grid power?

Yes. It may be suitable for compatible solar and off-grid systems using 6V AGM batteries in a correctly designed battery-bank configuration.

Can the DC200-6 be used for backup or standby power?

Yes. It may be suitable for compatible backup and standby systems requiring deep cycle AGM batteries with the correct voltage configuration, capacity and charging profile.

Should all batteries in a bank be the same?

For best system consistency, use matched batteries of the same model, chemistry, capacity, age and condition unless the system manufacturer specifically approves another configuration.

What terminals does the DC200-6 use?

The DC200-6 uses M8 terminals. Confirm the terminal position and polarity against your equipment or existing battery bank before purchase.

What are the DC200-6 dimensions?

The battery measures approximately 306mm long, 169mm wide and 220mm high at the case, or 226mm high including the terminals.

How much does the DC200-6 weigh?

The DC200-6 weighs approximately 30.0kg.

Is the battery case flame resistant?

Yes. The ABS plastic case has a supplied UL94-HB flame-resistance rating.

What charger should I use?

Use charging equipment suitable for sealed AGM battery chemistry and configured to the manufacturer’s recommended charging requirements for the battery and total bank voltage.

What charging voltage does the DC200-6 require?

No specific charging voltage was supplied with the provided DC200-6 product information. Use charging equipment configured to Fullriver’s recommended AGM charging requirements and the total voltage of the battery bank.

How do I know if the DC200-6 is suitable for my system?

Compare the required 6V battery specification or overall battery-bank design, AGM chemistry, Group 27 case size, 306 × 169 × 226mm overall dimensions, M8 terminal configuration, polarity and charging requirements with your equipment and system specifications before purchase.

---

🔋 HEAVY-DUTY 200AH DEEP CYCLE AGM POWER FOR DEMANDING BATTERY BANKS

Choose the Fullriver DC200-6 when you need substantial stored energy, exceptional reserve capacity and dependable repeated cycling from a robust maintenance-free AGM battery.

With 200Ah capacity, 400-minute reserve capacity at 25A, 100-minute reserve capacity at 75A, ultra-low 1.40mΩ internal resistance and trusted Fullriver DC Series construction, the DC200-6 is a strong choice for compatible golf car, cleaning equipment, caravan, marine, backup, solar and off-grid battery-bank applications.

Power your deep cycle system with dependable Fullriver DC Series AGM performance.