6V 200Ah Deep Cycle GEL Battery (DCG200-6)

🔋 FULLRIVER DCG200-6 DEEP CYCLE GEL BATTERY

6V 200Ah DIN Deep Cycle Gel Battery – AP Terminals, 457-Minute Reserve Capacity & Long Cycle Life

⚡ Heavy-duty high-capacity deep cycle power with sealed Gel technology, substantial reserve capacity and maintenance-free operation.

The Fullriver DCG200-6 is a premium 6V 200Ah Deep Cycle Gel battery engineered for demanding applications requiring dependable repeated discharge and recharge, substantial stored energy and long service life.

Part of Fullriver’s DCG Series, the DCG200-6 combines 99.994% pure virgin lead plates, heavy-duty over-the-partition welds and Fullriver’s proprietary thixotropic Gel electrolyte formulation to support reliable cycling performance, durability and resistance to vibration and shock.

With 200Ah capacity, DIN sizing, ultra-low 2.50mΩ internal resistance and reserve capacity ratings of 457 minutes at 25A and 115 minutes at 75A, the DCG200-6 is a strong choice for compatible solar, caravan, marine, mobility, backup, commercial and off-grid battery bank applications.

---

⚡ KEY FEATURES

🔋 6V Deep Cycle Gel Performance
Designed for true deep-cycle applications requiring repeated discharge and recharge operation.

⚡ 200Ah Capacity at 20HR Rate
Provides substantial stored energy for compatible 6V systems and correctly configured multi-battery banks.

🧪 Advanced Gel Electrolyte Technology
Fullriver’s proprietary thixotropic Gel formulation helps minimise electrolyte stratification and supports dependable cycling performance.

⏳ Approximately 1300 Cycles at 50% DOD
Engineered for extended service life when correctly charged and operated under suitable conditions.

💪 99.994% Pure Virgin Lead Plates
High-purity lead plate construction supports strength, durability and reliable repeated cycling.

🛡️ Strong Shock & Vibration Resistance
Heavy-duty over-the-partition welds help improve internal strength for demanding mobile, commercial and equipment applications.

⏱️ 457-Minute Reserve Capacity at 25A
Provides substantial reserve-energy performance for compatible 6V electrical loads.

💥 115-Minute Reserve Capacity at 75A
Demonstrates strong stored-energy capability under significantly heavier discharge loads.

⚡ Ultra-Low 2.50mΩ Internal Resistance
Supports efficient energy transfer and dependable output across compatible deep cycle and battery bank applications.

🔒 Sealed Recombinant Gel Construction
Provides maintenance-free operation and reduced off-gassing compared with conventional flooded batteries.

🔄 Flexible Installation
Can be installed in multiple compatible orientations, except upside down.

🌡️ Excellent Slow-Discharge Performance
Gel chemistry is well suited to applications involving sustained energy delivery over extended periods.

📦 DIN Battery Format
Provides high-capacity deep cycle performance in the supplied DIN-size battery format.

🧯 Flame-Resistant ABS Case
Durable ABS plastic housing with a UL94-HB flame-resistance rating.

🔌 AP Terminal Connections
Designed for compatible high-capacity battery systems requiring AP terminal configuration.

---

🔋 BUILT FOR TRUE DEEP CYCLE USE

The Fullriver DCG200-6 is specifically designed for applications where the battery is regularly discharged and recharged during normal operation.

Its 200Ah capacity at the 20-hour rate provides substantial stored energy for compatible solar systems, renewable-energy installations, battery banks, mobility equipment, auxiliary power systems and commercial equipment.

Its Gel construction is intended for sustained energy delivery and repeated cycling rather than dedicated high-current engine-starting use.

---

🧪 ADVANCED THIXOTROPIC GEL ELECTROLYTE

The DCG200-6 uses Fullriver’s proprietary Gel electrolyte formulation rather than conventional free-flowing liquid electrolyte.

This thixotropic Gel technology helps minimise electrolyte stratification and supports stable performance throughout repeated cycling.

Gel chemistry is particularly well suited to many slow-discharge applications where energy is delivered consistently over an extended period.

---

💪 HEAVY-DUTY PURE LEAD CONSTRUCTION

The DCG200-6 uses 99.994% pure virgin lead plates combined with robust internal construction.

Thick plate construction and heavy-duty over-the-partition welds help improve structural integrity and resistance to shock and vibration.

This construction supports dependable cycling performance in demanding commercial, mobility, marine, renewable-energy and auxiliary power applications.

---

⏳ DESIGNED FOR LONG CYCLE LIFE

The Fullriver DCG Series is engineered to provide extended service life in suitable deep cycle applications.

The supplied performance information indicates approximately 1300 cycles at 50% depth of discharge when the battery is correctly charged and operated under suitable conditions.

Actual battery service life will vary depending on depth of discharge, charging method, operating temperature, load profile, battery bank configuration and overall system conditions.

---

🔒 SEALED & MAINTENANCE-FREE

The DCG200-6 uses sealed recombinant Gel construction, eliminating the need for routine watering or electrolyte top-ups.

This provides cleaner and lower-maintenance operation than a conventional flooded lead-acid battery.

Its sealed design also helps reduce off-gassing during normal operation, although installations should still comply with applicable equipment and ventilation requirements.

---

🔄 FLEXIBLE INSTALLATION OPTIONS

The sealed Gel construction allows the DCG200-6 to be installed in multiple compatible orientations.

The battery should not be installed upside down.

Always securely restrain the battery and ensure the installation complies with the requirements of the equipment, battery enclosure and system manufacturer.

---

⏱️ HIGH RESERVE CAPACITY

The DCG200-6 provides substantial reserve-energy performance across different load levels.

• Reserve capacity at 25A: 457 minutes
• Reserve capacity at 75A: 115 minutes

These ratings provide an additional indication of the battery’s available stored energy alongside its amp-hour capacity.

---

📊 MULTIPLE CAPACITY RATINGS

The DCG200-6 provides different capacity figures depending on the discharge rate.

• Capacity at 1HR rate: 116Ah
• Capacity at 5HR rate: 167Ah
• Capacity at 20HR rate: 200Ah
• Capacity at 100HR rate: 230Ah

These ratings provide useful guidance for expected battery performance across different load and discharge conditions.

---

⚡ ULTRA-LOW INTERNAL RESISTANCE

The DCG200-6 has a specified internal resistance of approximately 2.50mΩ.

This supports efficient energy transfer and dependable performance across compatible deep cycle, auxiliary, standby and battery bank applications.

---

🔋 IDEAL FOR MULTI-BATTERY SYSTEMS

As a 6V battery, the DCG200-6 can be incorporated into correctly designed higher-voltage battery banks by connecting matched batteries in series.

For example, two matching 6V batteries connected in series can form a nominal 12V bank while retaining the amp-hour capacity of a single series string.

Additional parallel strings may be used only where the complete system, charging equipment, cabling, protection and battery matching are correctly engineered.

⚠️ IMPORTANT: Battery bank design should account for voltage, current, cable sizing, fusing, charging requirements, battery age and battery condition. Do not mix batteries of different chemistry, capacity, age or condition in the same bank unless specifically approved by the system manufacturer.

---

🔧 SUITABLE APPLICATIONS

• Solar and renewable-energy systems
• Off-grid battery banks
• Caravan and RV battery banks
• Marine auxiliary systems
• Backup and standby power systems
• Deep cycle battery banks
• Floor cleaning machines
• Mobility equipment
• Electric vehicle applications
• Commercial deep cycle equipment
• Personal deep-cycle applications
• Compatible 6V cyclic power systems

---

📐 PRODUCT SPECIFICATIONS

Brand: Fullriver

Model: DCG200-6

Series: DCG Series

Battery type: Deep Cycle Gel

Nominal voltage: 6V

Group size: DIN

Capacity at 1HR rate: 116Ah

Capacity at 5HR rate: 167Ah

Capacity at 20HR rate: 200Ah

Capacity at 100HR rate: 230Ah

Reserve capacity at 25A: 457 minutes

Reserve capacity at 75A: 115 minutes

Internal resistance: 2.50mΩ

Lead purity: 99.994% pure virgin lead

Electrolyte type: Thixotropic Gel

Case material: ABS plastic

Flame-resistance rating: UL94-HB

Terminal type: AP

Recommended terminal torque: 50–70 in-lbs

Weight: Approximately 30.0kg

Cycle performance: Approximately 1300 cycles at 50% depth of discharge under suitable operating conditions

---

📏 DIMENSIONS

Length: 243mm

Width: 188mm

Height: 275mm

Height including terminals: 275mm

---

📦 WHAT’S INCLUDED?

• 1 × Fullriver DCG200-6 6V 200Ah Deep Cycle Gel Battery

---

⚠️ FITMENT & COMPATIBILITY INFORMATION

Please confirm the electrical, physical and charging requirements of your system before purchasing.

Check the required:

• Battery voltage – 6V
• Battery chemistry – Gel
• Battery capacity
• Group size – DIN
• Physical dimensions
• Terminal type – AP
• Terminal orientation and polarity
• Terminal torque requirements
• Charging profile
• Battery bank voltage and configuration
• Cable and protection requirements
• Available installation space
• Deep cycle application requirements

⚠️ IMPORTANT: This is a 6V battery. Do not connect it directly to equipment requiring 12V, 24V, 36V, 48V or another system voltage unless it forms part of a correctly configured multi-battery bank.

⚠️ IMPORTANT: Gel batteries require a compatible charging profile. Do not assume a charger configured for AGM, flooded lead-acid or another battery chemistry is automatically suitable. Confirm charger compatibility before installation.

⚠️ IMPORTANT: Do not install the battery upside down. Always securely restrain the battery and follow the equipment manufacturer’s installation requirements.

---

❓ FREQUENTLY ASKED QUESTIONS

What type of battery is the Fullriver DCG200-6?

The DCG200-6 is a sealed 6V Deep Cycle Gel battery from Fullriver’s DCG Series.

What is the battery capacity?

The battery is rated at 200Ah at the 20-hour discharge rate.

What are the other capacity ratings?

The supplied specifications list 116Ah at the 1-hour rate, 167Ah at the 5-hour rate, 200Ah at the 20-hour rate and 230Ah at the 100-hour rate.

Is the DCG200-6 a 6V or 12V battery?

The DCG200-6 is a 6V battery. Multiple matching 6V batteries can be combined in a correctly designed series configuration where a higher system voltage is required.

Can I use two DCG200-6 batteries for a 12V system?

Two matching 6V DCG200-6 batteries can be connected in series to create a nominal 12V battery bank. In a series connection, the voltage adds while the amp-hour capacity remains 200Ah for that series string.

Can I use four DCG200-6 batteries for a 24V system?

Four matching 6V batteries can be connected in series to create a nominal 24V bank, provided the charging system, cabling, protection and equipment are designed for that configuration.

Does connecting batteries in series increase amp-hours?

No. Connecting batteries in series increases voltage while the amp-hour capacity remains the same as one battery in the series string. For example, two 6V 200Ah batteries in series create a nominal 12V 200Ah bank.

Does connecting batteries in parallel increase capacity?

Parallel connection can increase available amp-hour capacity while maintaining the same nominal voltage, but multi-string battery banks should be correctly engineered to ensure balanced cabling, appropriate protection, compatible charging and matched batteries.

Is the DCG200-6 a true deep cycle battery?

Yes. It is designed specifically for repeated deep cycle discharge and recharge applications.

What is the difference between Gel and AGM?

Both are sealed lead-acid battery technologies, but they retain electrolyte differently. AGM batteries absorb electrolyte into glass mat separators, while Gel batteries use a gelled electrolyte. Gel batteries require a compatible charging profile and are well suited to many sustained-discharge and repeated cycling applications.

What is the reserve capacity?

The DCG200-6 provides approximately 457 minutes of reserve capacity at a 25A load and approximately 115 minutes at a 75A load.

How many cycles can the DCG200-6 provide?

The supplied performance information indicates approximately 1300 cycles at 50% depth of discharge under suitable charging and operating conditions. Actual service life will vary with use.

Does the DCG200-6 require maintenance?

No routine watering or electrolyte top-ups are required because the battery uses sealed Gel construction.

Can the DCG200-6 be mounted on its side?

The sealed construction allows installation in multiple compatible orientations, but the battery should not be installed upside down. Always follow the equipment and battery enclosure requirements.

Is the DCG200-6 suitable for solar applications?

Yes. It may be suitable for compatible solar and renewable-energy systems designed around 6V Gel batteries or correctly configured higher-voltage battery banks.

Can the DCG200-6 be used in a caravan or RV?

Yes, where the electrical system is designed for compatible Gel batteries and the DCG200-6 is used in the correct voltage configuration with suitable charging equipment.

Is the DCG200-6 suitable for marine auxiliary power?

It may be suitable for compatible marine auxiliary and house-bank applications where its voltage configuration, capacity, dimensions, terminal arrangement and charging requirements match the system.

Can the DCG200-6 be used for off-grid battery banks?

Yes. Its 200Ah capacity and deep cycle Gel construction make it suitable for consideration in compatible off-grid battery banks when the complete system is correctly designed.

Can the DCG200-6 be used for backup or standby power?

Yes. It may be suitable for compatible backup and standby systems requiring deep cycle Gel batteries with the correct voltage configuration and charging profile.

Can the DCG200-6 be used for mobility equipment?

It may be suitable for compatible mobility and electric vehicle applications where the required system voltage, capacity, battery dimensions, terminal configuration and charger profile match.

Can the DCG200-6 be used in a floor cleaning machine?

Yes, where the equipment requires compatible 6V Gel deep cycle batteries or a correctly configured multi-battery bank with matching specifications.

Can the DCG200-6 be used for engine starting?

The DCG200-6 is designed as a deep cycle Gel battery. No dedicated CCA rating has been supplied, so it should not be selected as an engine-starting battery unless the equipment manufacturer specifically confirms suitability.

What terminals does the DCG200-6 use?

The DCG200-6 uses AP terminals with a recommended tightening torque of 50–70 in-lbs.

What are the battery dimensions?

The battery measures approximately 243mm long, 188mm wide and 275mm high including the terminals.

How much does the DCG200-6 weigh?

The DCG200-6 weighs approximately 30.0kg.

What is the internal resistance?

The supplied internal resistance specification is approximately 2.50mΩ.

Is the battery case flame resistant?

Yes. The ABS plastic case has a supplied UL94-HB flame-resistance rating.

Can I use a standard AGM charger with this battery?

Only if the charger manufacturer confirms that its charging profile is suitable for Gel batteries. Gel and AGM batteries can require different charging settings, so charger compatibility should always be confirmed before use.

What charging voltage does the DCG200-6 require?

No specific charging voltage was supplied with the provided product information. Use charging equipment with a profile confirmed as suitable for the Fullriver DCG200-6 and correctly configured for the total voltage of the battery bank.

Should all batteries in a bank be the same?

For best system consistency, use matched batteries of the same model, chemistry, capacity, age and condition unless the system manufacturer specifically approves another configuration.

How do I know if the DCG200-6 is suitable for my system?

Compare the required 6V battery specification or overall battery bank design, Gel chemistry, DIN case format, 243 × 188 × 275mm dimensions, AP terminal configuration, polarity, terminal torque and charging profile with your equipment and system requirements before purchase.

---

🔋 HEAVY-DUTY 200AH DEEP CYCLE GEL POWER FOR DEMANDING BATTERY BANKS

Choose the Fullriver DCG200-6 when you need substantial stored energy, dependable repeated cycling and maintenance-free Gel battery technology for demanding 6V or correctly configured multi-battery systems.

With 200Ah capacity, approximately 1300 cycles at 50% depth of discharge, 457-minute reserve capacity at 25A, ultra-low 2.50mΩ internal resistance, 99.994% pure virgin lead construction and sealed Gel electrolyte technology, the DCG200-6 is built for compatible solar, caravan, marine, mobility, backup, commercial and off-grid applications.

Power your deep cycle system with dependable Fullriver DCG Series Gel performance.