6V 5AH Multi Purpose AGM Battery (ES650A)

🔋 PREDATOR ES650A MULTI-PURPOSE AGM BATTERY – 6V 5AH

General-Purpose VRLA AGM Battery – 6V, Supplied 4.8Ah C20 Rating, Maintenance-Free Construction & Standby / Light-Cycling Capability

⚡ The Predator ES650A is a compact 6V multi-purpose Absorbent Glass Mat battery designed for everyday general-purpose, standby, float and light-cycling duties.

Part of the Predator ES range, the ES650A uses VRLA AGM construction with compressible glass mat separators positioned between the battery plates. These separators retain the electrolyte required for the battery’s internal chemical reaction while helping reduce internal resistance and improve overall operating efficiency.

Its maintenance-free construction, low self-discharge characteristics and high-strength ABS casing make it suitable for a broad range of compatible electronic, backup-power, automation, security, telecom and control applications.

The supplied product title identifies this model as a 6V 5Ah battery, while the detailed capacity specifications list a 20-hour rated capacity of 4.8Ah. Both supplied values are retained here so the product can be matched accurately against the intended equipment specification.

The supplied product information also states that the Predator ES range is approved under the CSIRO ActivFire Scheme and listed in the Register of Fire Protection Equipment for fire panels and systems.

---

⚡ KEY FEATURES

🔋 6V Multi-Purpose AGM Battery
Designed for compatible general-purpose, standby, float and light-cycling applications.

🔌 Supplied 4.8Ah C20 Capacity
The detailed specification lists a 20-hour rated capacity of 4.8Ah, while the supplied product title describes the model as 5Ah.

🛡️ VRLA Construction
Valve Regulated Lead Acid construction is designed to prevent electrolyte leakage from the battery casing or terminals under normal operating conditions.

🧰 Maintenance-Free Operation
No routine water checking or electrolyte topping-up is required.

🔄 General & Light-Cycling Use
Designed for everyday general duties and light cycling rather than heavy continuous deep-cycle service.

⚡ Standby & Float Applications
Well suited to compatible standby and float-use systems including UPS, emergency lighting, security and control equipment.

💧 AGM Electrolyte Retention
Compressible glass mat separators retain the electrolyte required for the battery’s internal chemical reaction.

📉 Low Self-Discharge
Designed with a low self-discharge rate to help extend shelf life during storage.

🧪 99.9% Fine-Grain Lead
The supplied information states that 99.9% lead is used to create grids with a stronger grain structure and higher resistance to corrosion.

🧱 High-Strength ABS Casing
Designed to withstand elevated operating temperatures and maintain battery cell compression for dependable operation.

⚡ Low Internal Resistance
Supplied internal resistance is listed as no more than 18mΩ when fully charged.

🔥 ActivFire Approved Range
The supplied product information states that the Predator ES range is approved under the CSIRO ActivFire Scheme and listed in the Register of Fire Protection Equipment for fire panels and systems.

↔️ Flexible Operating Orientation
The supplied information states that the battery can operate in any orientation except inverted.

---

🔋 GENERAL-PURPOSE AGM POWER

The Predator ES650A is designed for applications requiring a compact sealed 6V battery for standby, float or light-cycling duties.

Unlike a conventional serviceable flooded battery, the ES650A uses AGM construction and requires no routine electrolyte maintenance.

Its compact form and supplied capacity ratings make it suitable for compatible low-voltage equipment requiring dependable stored energy.

---

🛡️ VRLA AGM CONSTRUCTION

The ES650A uses Valve Regulated Lead Acid and Absorbent Glass Mat construction.

Compressible glass mat separators are positioned between the battery plates and retain the electrolyte required for the internal electrochemical reaction.

The supplied information states that this design reduces internal resistance and improves overall battery efficiency.

• VRLA construction
• AGM electrolyte retention
• Maintenance-free operation
• Reduced leakage risk under normal use
• Low self-discharge
• Compact battery format

---

🔌 CAPACITY RATING

Nominal voltage: 6V

Supplied product title: 5Ah

Detailed 20-hour capacity specification: 4.8Ah

The detailed specification lists the following capacity ratings at different discharge rates.

⚠️ IMPORTANT: The supplied product title states 5Ah while the technical specification gives a 20-hour capacity of 4.8Ah. This listing retains both supplied figures rather than treating them as identical.

---

📊 CAPACITY AT DIFFERENT DISCHARGE RATES

20-hour rate: 4.8Ah at supplied discharge value of 9.0A

5-hour rate: 4.45Ah at supplied discharge value of 15.9A

1-hour rate: 3.3Ah at supplied discharge value of 55.4A

⚠️ IMPORTANT: The discharge-current figures above are reproduced exactly from the supplied source. Their stated values should be checked against the manufacturer’s current technical datasheet before using them for engineering calculations or battery sizing.

---

🔄 STANDBY / FLOAT USE

The ES650A is particularly suited to compatible standby and float applications where the battery remains connected to a controlled charging source for extended periods.

Supplied float-use voltage:

6.8V–6.90V at 25°C

⚠️ IMPORTANT: Use a charger or power supply designed for sealed AGM / VRLA batteries and capable of maintaining the specified float voltage.

---

🔁 CYCLE USE

The Predator ES650A can also be used for compatible light-cycling applications.

Supplied cycle-use voltage:

7.20V–7.50V at 25°C

Recommended charge current:

0.5A @ 6V

Maximum emergency charge current:

1.25A @ 6V

⚠️ IMPORTANT: Charging voltage and current must be appropriately controlled for AGM battery chemistry. Do not exceed the supplied charging limits.

---

📉 LOW SELF-DISCHARGE

The supplied specification states greater than 91% remaining capacity after three months at 25°C.

This low self-discharge characteristic helps make the ES650A suitable for standby systems and equipment that may spend extended periods without active discharge.

Storage temperature, battery condition and state of charge can affect capacity retention.

---

⚡ INTERNAL RESISTANCE

Supplied internal resistance:

Fully charged battery: ≤18mΩ

Low internal resistance can improve current delivery and overall battery efficiency in compatible applications.

---

🧪 HIGH-PURITY FINE-GRAIN LEAD

The supplied product information states that the Predator ES range uses 99.9% lead to create grids with a stronger grain structure and higher resistance to corrosion.

This construction is intended to support dependable service in general-purpose, standby and light-cycling applications.

---

🧱 HIGH-STRENGTH ABS CASING

The ES650A uses an ABS battery casing.

The supplied information states that this casing is designed to withstand elevated operating temperatures while maintaining high battery cell compression for reliable operation.

---

🔥 CSIRO ACTIVFIRE SCHEME

The supplied product information states that the Predator ES battery range is approved under the CSIRO ActivFire Scheme and listed in the Register of Fire Protection Equipment for fire panels and systems.

This makes the range relevant to compatible fire-panel and fire-system applications where the applicable equipment specification accepts this battery.

⚠️ IMPORTANT: ActivFire approval of the range does not automatically confirm suitability for every fire panel or fire-protection system. Always check the specific equipment manufacturer’s battery requirements.

---

🌡️ OPERATING TEMPERATURE

Discharge temperature: -15°C to 50°C

Charge temperature: 0°C to 40°C

The supplied storage row does not provide a numerical storage-temperature range.

⚠️ IMPORTANT: Avoid charging outside the supplied 0°C to 40°C charging temperature range.

---

🔧 SUITABLE APPLICATIONS

• 🧸 Electronic toys and equipment
• 🛴 Compatible e-scooters and bikes
• 🚨 Emergency lighting
• 💡 Electronic light displays
• 🔌 UPS systems
• ⚙️ Automation systems
• 🔐 Security systems
• 🥤 Vending machines
• 🎛️ Control equipment
• ☀️ Compatible solar power systems
• 🌬️ Compatible wind-power systems
• 📡 Telecom systems
• 🔥 Compatible fire panels and fire systems

---

📏 DIMENSIONS & WEIGHT

Length: 70mm

Width: 47mm

Height: 101mm

Total height: 107mm

Weight: Approximately 0.8kg

Casing material: ABS

---

📋 TECHNICAL SPECIFICATIONS

Brand / Range: Predator ES

Model: ES650A

Battery type: Multi-Purpose AGM / VRLA

Nominal voltage: 6V

Supplied product title capacity: 5Ah

Detailed 20-hour rated capacity: 4.8Ah

20-hour supplied discharge figure: 9.0A

5-hour capacity: 4.45Ah

5-hour supplied discharge figure: 15.9A

1-hour capacity: 3.3Ah

1-hour supplied discharge figure: 55.4A

Length: 70mm

Width: 47mm

Height: 101mm

Total height: 107mm

Weight: Approximately 0.8kg

Casing material: ABS

Self-discharge at 25°C: Greater than 91% remaining after 3 months according to supplied information

Internal resistance: ≤18mΩ when fully charged

Discharge temperature range: -15°C to 50°C

Charge temperature range: 0°C to 40°C

Storage temperature range: Not numerically specified in the supplied information

Float-use voltage: 6.8V–6.90V at 25°C

Cycle-use voltage: 7.20V–7.50V at 25°C

Recommended charge current: 0.5A @ 6V

Maximum emergency charge current: 1.25A @ 6V

Construction: VRLA AGM

Lead purity: 99.9% according to supplied product information

---

⚠️ INSTALLATION & COMPATIBILITY CHECKLIST

Before purchasing the Predator ES650A, confirm that the battery matches the electrical, physical and charging requirements of your equipment.

• 6V system compatibility
• Required battery capacity
• Battery dimensions and available installation space
• Terminal arrangement and connection requirements
• Required discharge current
• Required runtime
• AGM / VRLA charging compatibility
• Float-voltage requirements
• Cycle-charge voltage requirements
• Operating-temperature requirements
• Equipment manufacturer battery specification

⚠️ IMPORTANT: The supplied information does not specify the terminal type or terminal dimensions for this ES650A listing. Confirm the physical terminal arrangement before purchase.

⚠️ IMPORTANT: Do not substitute a battery based on voltage and nominal Ah description alone. Physical dimensions, terminals, charging requirements, actual rated capacity and discharge capability must also be compatible.

⚠️ IMPORTANT: The supplied information states that the battery may be operated in any orientation except inverted.

---

❓ FREQUENTLY ASKED QUESTIONS

What is the Predator ES650A?

The ES650A is a compact 6V VRLA AGM battery designed for general-purpose, standby, float and light-cycling applications.

Is the ES650A a 5Ah battery?

The supplied product title describes it as 5Ah, while the detailed technical specification lists a 20-hour rated capacity of 4.8Ah.

What is the nominal voltage?

The nominal voltage is 6V.

What is the detailed 20-hour capacity?

The supplied detailed specification lists 4.8Ah at the 20-hour rate.

What is the 5-hour capacity?

The supplied 5-hour capacity is 4.45Ah.

What is the 1-hour capacity?

The supplied 1-hour capacity is 3.3Ah.

Are the supplied discharge-current figures correct?

The source lists 9.0A for the 20-hour rate, 15.9A for the 5-hour rate and 55.4A for the 1-hour rate. These figures have been retained exactly as supplied and should be confirmed against the current manufacturer datasheet before being used for calculations.

Is the ES650A AGM?

Yes. It uses Absorbent Glass Mat construction.

Is it a VRLA battery?

Yes. The supplied product information identifies the Predator ES range as using VRLA construction.

Is it maintenance free?

Yes. No routine water checking or electrolyte topping-up is required.

Can it operate in different orientations?

The supplied information states that it can operate in any orientation except inverted.

What is the recommended charging current?

The supplied recommended charge current is 0.5A at 6V.

What is the maximum emergency charge current?

The supplied maximum emergency charge current is 1.25A at 6V.

What voltage should be used for float charging?

The supplied float-use voltage range is 6.8V to 6.90V at 25°C.

What voltage should be used for cycle charging?

The supplied cycle-use voltage range is 7.20V to 7.50V at 25°C.

What is the internal resistance?

The supplied internal resistance is no more than 18mΩ when fully charged.

Can it be used in a UPS?

Yes. UPS systems are specifically included in the supplied application list, subject to electrical and physical compatibility.

Can it be used for emergency lighting?

Yes. Emergency lighting is specifically listed as an application for the Predator ES range.

Can it be used in security systems?

Yes. Security systems are included in the supplied application list.

Can it be used in fire panels?

The supplied product information states that the Predator ES range is approved under the CSIRO ActivFire Scheme and listed for fire panels and systems. Compatibility with the specific fire panel must still be confirmed.

Can it be used in solar applications?

Solar power is included in the supplied application information. System voltage, charging method and cycling requirements must still be compatible with the ES650A.

Can it be used for wind-power systems?

Wind power is included in the supplied application information, subject to correct voltage, charging and battery-capacity requirements.

What is the discharge temperature range?

The supplied discharge temperature range is -15°C to 50°C.

What is the charging temperature range?

The supplied charging temperature range is 0°C to 40°C.

What is the self-discharge specification?

The supplied specification states greater than 91% remaining capacity after three months at 25°C.

What are the battery dimensions?

The supplied dimensions are 70mm long, 47mm wide and 101mm high, with a total height of 107mm.

How much does the ES650A weigh?

The supplied weight is approximately 0.8kg.

What casing material is used?

The supplied casing material is ABS.

What terminal type does the ES650A use?

The supplied information does not specify the terminal type or terminal dimensions, so these should be confirmed before purchase.

What should I check before replacing an existing battery?

Confirm the 6V voltage, required capacity, physical dimensions, terminal arrangement, charger compatibility, operating temperature and equipment manufacturer requirements before installation.

---

🔋 COMPACT 6V AGM POWER FOR STANDBY, BACKUP & LIGHT-CYCLING APPLICATIONS

Choose the Predator ES650A when you need a compact 6V AGM battery for compatible standby, float, backup-power or light-cycling equipment.

With a supplied 4.8Ah C20 rating, VRLA AGM construction, low self-discharge, ≤18mΩ supplied internal resistance, maintenance-free operation and a high-strength ABS casing, the ES650A is designed to provide dependable everyday power across a broad range of electronic and control applications.

Confirm the required capacity, battery dimensions, terminal configuration, charging voltage, charge current and equipment specifications before installation to ensure the Predator ES650A is correct for your application.