Tow-Pro Universal Remote Head Kit

🎛️ REDARC TOW-PRO REMOTE HEAD SURROUND MOUNT

Universal Tow-Pro Remote Head Mount – OE-Style Installation for Panels Without a Switch Blank

🔧 Create a clean, professional mounting point for your REDARC Tow-Pro remote head when a suitable factory switch blank is not available.

The REDARC Tow-Pro Remote Head Surround Mount is a universal installation solution designed to assist fitting a compatible Tow-Pro remote head into suitable vehicle dashboard and console panels.

Unlike vehicle-specific switch inserts that rely on an existing unused switch position, the Surround Mount allows the installer to create a dedicated mounting location where no switch blank is available.

Its design can also accommodate suitable panels with rounded edges, helping achieve a neat OE-style appearance while maintaining ADR21 compliance when correctly fitted.

---

⚡ KEY FEATURES

🎛️ Universal Tow-Pro Remote Head Mount
Designed to assist installation of a compatible REDARC Tow-Pro remote head into a wide range of suitable vehicle interiors.

🔧 Ideal When No Switch Blank Is Available
Allows a dedicated Tow-Pro remote-head mounting position to be created without requiring an existing factory switch opening.

🚗 OE-Style Appearance
Designed to provide a clean, professional finish that integrates neatly with the vehicle interior.

↪️ Suitable for Rounded Edges
Designed to accommodate suitable mounting locations with curved or rounded panel edges.

📏 Suits Panels Up to 2.2mm Thick
Compatible with suitable dashboard or console panels measuring up to approximately 2.2mm in thickness.

🛡️ ADR21-Compatible Installation
Designed to maintain ADR21 compliance when the Tow-Pro remote head and surround are fitted correctly.

⚡ Simple Installation
Provides a straightforward universal mounting solution where a vehicle-specific switch insert is not suitable.

---

🎛️ DESIGNED FOR CUSTOM TOW-PRO INSTALLATIONS

The Tow-Pro Remote Head Surround Mount is particularly useful when the vehicle does not have a suitable unused switch blank for a vehicle-specific REDARC switch insert.

It allows the installer to select an appropriate dashboard or console location and create a dedicated mounting position for the Tow-Pro remote control.

This provides greater flexibility when working with vehicles that have limited factory switch locations or unconventional dashboard layouts.

---

🚗 CLEAN OE-STYLE APPEARANCE

The Surround Mount is designed to help the Tow-Pro remote control look integrated into the vehicle interior rather than appearing as an obvious aftermarket addition.

When positioned and installed correctly, the surround creates a neat finished edge around the remote head for a more professional appearance.

This makes it suitable for custom installations where appearance is important but a vehicle-specific switch insert cannot be used.

---

↪️ SUITABLE FOR ROUNDED PANEL EDGES

The universal surround design can accommodate suitable mounting locations with rounded or curved edges.

This provides additional flexibility when selecting a location in dashboards, centre consoles and other interior panels that may not provide a completely flat switch surface.

⚠️ IMPORTANT: Always confirm the selected surface provides sufficient support, clearance and correct access to the Tow-Pro remote head before modifying the panel.

---

📏 SUITS PANELS UP TO 2.2MM THICK

The supplied product information specifies compatibility with suitable panels up to approximately 2.2mm thick.

Panel thickness should be checked before installation to ensure the surround and remote head can be mounted securely and operate correctly.

⚠️ IMPORTANT: Panels thicker than 2.2mm are outside the supplied compatibility specification for this mount.

---

🛡️ ADR21-COMPLIANT WHEN CORRECTLY INSTALLED

REDARC Tow-Pro switch mounting accessories are designed to provide a professional remote-head installation while maintaining ADR21 compliance when fitted correctly.

Correct positioning and secure installation remain essential, particularly when mounting a control within the driver’s dashboard or console area.

⚠️ IMPORTANT: Follow the applicable REDARC installation requirements and ensure the finished installation does not interfere with airbags, vehicle controls, wiring or other safety equipment.

---

🔌 DESIGNED FOR THE REDARC TOW-PRO REMOTE HEAD

The Surround Mount is an installation accessory designed to support mounting of a compatible REDARC Tow-Pro remote head.

It does not include or replace the Tow-Pro electric trailer brake controller itself.

The remote head, controller and associated wiring components are not stated as included with the Surround Mount.

---

🚘 SUITABLE APPLICATIONS

• Vehicles without a suitable unused switch blank
• Custom Tow-Pro remote-head installations
• Compatible dashboard panels
• Compatible centre-console panels
• Suitable panels with rounded edges
• Panels up to approximately 2.2mm thick
• Applications where an OE-style remote-head appearance is desired

---

📐 PRODUCT SPECIFICATIONS

Brand: REDARC

Product: Tow-Pro Remote Head Surround Mount

Application: Tow-Pro remote-head mounting

Mounting type: Universal surround mount

Designed for: Applications without a suitable factory switch blank

Panel compatibility: Suitable panels up to approximately 2.2mm thick

Rounded-edge compatibility: Yes, suitable installations

Installation style: Universal / custom mounting

ADR21: Designed to maintain compliance when correctly installed

---

📦 WHAT’S INCLUDED?

• 1 × REDARC Tow-Pro Remote Head Surround Mount

⚠️ Tow-Pro brake controller, remote head and associated wiring components are not stated as included and should be purchased separately unless your specific package expressly states otherwise.

---

⚠️ FITMENT & INSTALLATION INFORMATION

Please confirm the intended mounting location before modifying the dashboard or console.

Check the following:

• Compatible REDARC Tow-Pro remote head
• Available dashboard or console space
• Panel thickness – maximum approximately 2.2mm
• Panel shape and curvature
• Clearance behind the selected mounting location
• Remote-head cable routing
• Safe driver access to the control
• Clearance from airbags
• Clearance from wiring looms
• Clearance from ventilation ducts and vehicle controls
• ADR21 installation requirements

⚠️ IMPORTANT: Always inspect behind the proposed mounting location before drilling or cutting. Vehicle wiring, airbags, ducts and structural components may be concealed behind dashboard panels.

⚠️ IMPORTANT: Confirm panel thickness does not exceed the supplied 2.2mm specification.

⚠️ REDARC recommends installation by a qualified auto electrician or technician.

---

❓ FREQUENTLY ASKED QUESTIONS

What is the REDARC Tow-Pro Remote Head Surround Mount?

It is a universal mounting accessory designed to provide a clean installation point for a compatible REDARC Tow-Pro remote head.

When should I use the Surround Mount?

It is particularly useful when your vehicle does not have a suitable unused factory switch blank for a vehicle-specific Tow-Pro switch insert.

Is this a Tow-Pro brake controller?

No. It is a mounting accessory only. The Tow-Pro electric trailer brake controller is not stated as included.

Does it include the Tow-Pro remote head?

No remote-head assembly is stated as included. The Surround Mount is designed to provide the mounting position for a compatible remote head.

Does it require an existing switch blank?

No. One of the main purposes of the universal Surround Mount is to allow installation where no suitable switch blank is available.

Can it be installed on a curved dashboard?

The supplied information states that the Surround Mount can accommodate suitable rounded edges, providing greater flexibility for custom dashboard installations.

What is the maximum panel thickness?

The supplied compatibility information states that it suits suitable panels up to approximately 2.2mm thick.

Can I use it on a panel thicker than 2.2mm?

Panels thicker than 2.2mm are outside the supplied compatibility specification and should not be assumed to be suitable.

Does it provide a factory-style appearance?

Yes. The Surround Mount is designed to create an OE-style appearance when correctly integrated into a suitable dashboard or console panel.

Is it vehicle specific?

No. It is a universal mounting solution intended for suitable custom Tow-Pro remote-head installations.

Is it ADR21 compliant?

The supplied information states that REDARC Tow-Pro mounting inserts are designed to maintain ADR21 compliance when fitted correctly.

Where can the Surround Mount be installed?

It may be installed in a suitable dashboard, centre-console or interior panel location with sufficient space, acceptable panel thickness and adequate rear clearance.

Can it be installed anywhere on the dashboard?

No. The selected position must allow safe access to the Tow-Pro control and must not interfere with airbags, vehicle controls, wiring, ventilation ducts or other safety-critical equipment.

Do I need to check behind the panel before drilling?

Yes. Always inspect behind the proposed mounting position before modifying the panel to avoid damaging concealed wiring, airbags, ducts or structural components.

What is the difference between this and a vehicle-specific switch insert?

A vehicle-specific switch insert normally replaces an existing factory switch blank. The universal Surround Mount is intended for custom installations where a suitable switch blank is not available.

What is the difference between this and the universal Tow-Pro switch insert?

The Surround Mount is specifically intended to create a mounting point where no switch blank is available and can accommodate suitable rounded-edge installations. Always select the mounting accessory that best matches the dashboard design and panel thickness.

Is it simple to install?

The supplied product information describes the Surround Mount as simple to install, although correct dashboard preparation and safe cable routing remain important.

Should it be professionally installed?

Yes. REDARC recommends installation by a qualified auto electrician or technician.

How do I know if the Surround Mount will suit my vehicle?

Confirm that you have a suitable dashboard or console location, that the panel is no more than approximately 2.2mm thick, that sufficient clearance exists behind the panel and that the Tow-Pro remote head can be positioned safely and accessibly.

---

🎛️ CLEAN UNIVERSAL TOW-PRO MOUNTING WITHOUT A FACTORY SWITCH BLANK

Choose the REDARC Tow-Pro Remote Head Surround Mount when your vehicle does not provide a suitable factory switch blank but you still want a clean, professional Tow-Pro installation.

With universal fitment, compatibility with suitable rounded panel edges and support for panels up to approximately 2.2mm thick, the Surround Mount provides a practical solution for custom Tow-Pro remote-head installations.

Complete your Tow-Pro installation with a neat OE-style REDARC mounting solution.