Tow-Pro switch insert for Colorado D-MAX MU-X

🎛️ REDARC TOW-PRO SWITCH INSERT FOR HOLDEN COLORADO & ISUZU D-MAX / MU-X

TPSI-003 Vehicle-Specific Tow-Pro Remote Head Mount – OE-Style Replacement for Selected Holden & Isuzu Models

🔧 Create a clean, factory-style Tow-Pro remote-head installation in selected Holden Colorado, Isuzu D-MAX and Isuzu MU-X vehicles.

The REDARC TPSI-003 Tow-Pro Switch Insert Panel is designed to assist installation of a compatible Tow-Pro remote head by replacing the right-hand accessory power socket in the lower centre front console of supported vehicles.

Designed to provide an OE-style appearance, the TPSI-003 allows the Tow-Pro remote control to integrate neatly into the vehicle interior while maintaining ADR21 compliance when fitted correctly.

It is a practical installation solution for selected Holden Colorado RG, Isuzu D-MAX and Isuzu MU-X models where the specified accessory-socket mounting position is available.

---

⚡ KEY FEATURES

🎛️ Vehicle-Specific Tow-Pro Mount
Designed for selected Holden Colorado, Isuzu D-MAX and Isuzu MU-X vehicles.

🚗 OE-Style Appearance
Helps create a clean, integrated Tow-Pro installation that blends more naturally with the factory interior.

🔌 Replaces Right-Hand Accessory Socket
Designed to replace the right-hand power socket in the lower centre front console on compatible vehicles.

🔧 Simple Installation
Provides a purpose-designed mounting location for a compatible Tow-Pro remote head.

🛡️ ADR21-Compatible Installation
Designed to maintain ADR21 compliance when correctly fitted according to the applicable installation requirements.

📐 41.8mm × 41.8mm Face
Uses a compact square face designed for the specified vehicle mounting position.

🎯 Tow-Pro Remote Head Compatible
Designed to assist installation of a compatible REDARC Tow-Pro remote control.

📦 Bulk Pack Available
Also available as a 10-pack under part number TPSI-003-B for workshops and professional installers.

🛡️ 2-Year Warranty
Backed by the supplied REDARC 2-year warranty.

---

🚙 HOLDEN COLORADO COMPATIBILITY

The TPSI-003 is listed for the following Holden application:

• Holden Colorado RG – 2012 to Current

The insert is designed to replace the right-hand accessory power socket in the lower centre front console where the specified configuration is present.

⚠️ IMPORTANT: Always confirm the actual centre-console layout and accessory-socket configuration before purchase, as vehicle interiors can vary by model, trim and equipment level.

---

🚗 ISUZU D-MAX & MU-X COMPATIBILITY

The TPSI-003 is also listed for selected Isuzu models:

• Isuzu D-MAX – 2017 to Current
• Isuzu MU-X – 2017 to Current

For these applications, the insert replaces the accessory socket in the specified console position.

⚠️ IMPORTANT: Notching may be required in some Isuzu applications to achieve the correct Tow-Pro remote-head orientation.

---

🎛️ CLEAN OE-STYLE TOW-PRO INSTALLATION

The TPSI-003 is designed to create a more integrated appearance than a generic aftermarket mounting solution.

By using an existing accessory-socket position, the remote head can be installed into a factory-style dashboard or console location without requiring a separate surface-mounted control housing.

This helps maintain a clean cabin appearance while keeping the Tow-Pro remote control accessible to the driver.

---

🔌 REPLACES THE ACCESSORY POWER SOCKET

The TPSI-003 is designed around the right-hand accessory power socket position in the lower centre front console of compatible vehicles.

Installing the switch insert therefore removes that socket position from its original accessory-power function.

⚠️ IMPORTANT: This installation replaces the applicable accessory power socket. Confirm that you are comfortable losing or relocating that socket before installation.

---

🔧 ORIENTATION & NOTCHING REQUIREMENTS

Some compatible installations may require minor notching of the mounting area to allow the Tow-Pro remote head to sit in the correct orientation.

This is particularly important where the existing accessory-socket opening does not naturally align the controller exactly as required.

⚠️ IMPORTANT: Any trimming or notching should be completed carefully and only after confirming the correct mounting position, remote-head orientation and clearance behind the console.

---

🛡️ ADR21-COMPLIANT WHEN CORRECTLY INSTALLED

REDARC Tow-Pro switch inserts are designed to provide an OE-style remote-head installation while maintaining ADR21 compliance when fitted correctly.

Correct location, orientation and installation of the remote head remain essential.

⚠️ IMPORTANT: Follow the applicable REDARC installation instructions and ensure the completed installation does not interfere with vehicle controls, airbags or other safety equipment.

---

🔌 DESIGNED FOR THE REDARC TOW-PRO REMOTE HEAD

The TPSI-003 is a mounting accessory for a compatible REDARC Tow-Pro remote head.

It does not replace the Tow-Pro brake controller itself and is intended only to provide a suitable vehicle-specific mounting point for the remote control.

The brake controller and remote-head components are not stated as included with the TPSI-003.

---

🚘 VEHICLE COMPATIBILITY

Holden Colorado RG: 2012 – Current

Isuzu D-MAX: 2017 – Current

Isuzu MU-X: 2017 – Current

Mounting position: Right-hand accessory power socket in lower centre front console

Installation note: Notching may be required to achieve correct orientation

---

📐 PRODUCT SPECIFICATIONS

Brand: REDARC

Product: Tow-Pro Switch Insert Panel

Part number: TPSI-003

Application: Tow-Pro remote-head mounting

Primary vehicle compatibility: Selected Holden Colorado & Isuzu D-MAX / MU-X models

Mounting position: Replacement for compatible right-hand accessory power socket

Face height: Approximately 41.8mm

Face width: Approximately 41.8mm

Weight: Approximately 50g

GTIN / Barcode: 9338628004744

Warranty: 2 Years

ADR21: Designed to maintain compliance when correctly installed

---

📦 WHAT’S INCLUDED?

• 1 × REDARC TPSI-003 Tow-Pro Switch Insert Panel

⚠️ Tow-Pro brake controller and Tow-Pro remote-head components are not stated as included and should be purchased separately unless your specific package expressly states otherwise.

---

📦 BULK PACK OPTION

The REDARC TPSI-003 is also available in a bulk pack of 10 under part number TPSI-003-B.

This may be useful for auto electricians, accessory installers, workshops and other businesses carrying out multiple Tow-Pro installations.

⚠️ Unless specifically stated otherwise, this listing is for one TPSI-003 switch insert rather than the TPSI-003-B bulk pack.

---

⚠️ FITMENT & COMPATIBILITY INFORMATION

Please confirm the actual centre-console configuration before purchase or installation.

Check the following:

• Vehicle make
• Vehicle model
• Vehicle model year
• Console and trim configuration
• Presence of the compatible right-hand accessory power socket
• Available clearance behind the socket location
• Tow-Pro remote-head compatibility
• Remote-head cable routing
• Correct remote-head orientation
• Whether notching or minor trimming is required
• Safe driver access to the control
• Clearance from airbags and vehicle controls

⚠️ IMPORTANT: Installing the TPSI-003 replaces the applicable accessory power socket.

⚠️ IMPORTANT: Model and year compatibility alone does not guarantee fitment. Console layouts can vary between trim levels and vehicle specifications.

⚠️ IMPORTANT: Notching may be required to achieve the correct remote-head orientation in some applications.

⚠️ REDARC recommends installation by a qualified auto electrician or technician.

---

❓ FREQUENTLY ASKED QUESTIONS

What is the REDARC TPSI-003?

The TPSI-003 is a vehicle-specific switch insert designed to help mount a compatible REDARC Tow-Pro remote head into selected Holden Colorado, Isuzu D-MAX and Isuzu MU-X vehicles.

Is the TPSI-003 a brake controller?

No. It is a mounting accessory for the Tow-Pro remote head. The Tow-Pro brake controller itself is not stated as included.

Which Holden models are listed as compatible?

The supplied compatibility information lists Holden Colorado RG models from 2012 to Current.

Does the TPSI-003 suit an Isuzu D-MAX?

Yes. The supplied compatibility information lists Isuzu D-MAX models from 2017 to Current.

Does it suit an Isuzu MU-X?

Yes. Isuzu MU-X models from 2017 to Current are included in the supplied compatibility information.

Where does the TPSI-003 install?

It is designed to replace the right-hand accessory power socket in the lower centre front console of compatible vehicles.

Will I lose the accessory power socket?

Yes. The specified installation uses the accessory-socket position, so that socket is replaced by the Tow-Pro switch insert.

Does installation require any cutting?

The supplied information states that notching may be required in some installations to achieve the correct remote-head orientation.

Why might notching be required?

The existing socket opening may not naturally position the Tow-Pro remote head in the correct orientation, so minor modification can be required during installation.

Does it provide an OE-style appearance?

Yes. The TPSI-003 is designed to create a clean, factory-style Tow-Pro remote-head installation when correctly fitted.

Is the TPSI-003 ADR21 compliant?

The supplied information states that REDARC Tow-Pro Switch Inserts are designed to maintain ADR21 compliance when correctly installed.

What are the face dimensions?

The TPSI-003 has supplied face dimensions of approximately 41.8mm high × 41.8mm wide.

How much does the TPSI-003 weigh?

The supplied product weight is approximately 50g.

What is the barcode?

The supplied GTIN / barcode is 9338628004744.

What warranty does the TPSI-003 have?

The supplied product information lists a 2-year warranty.

Does the TPSI-003 include the Tow-Pro remote head?

No Tow-Pro remote-head components are stated as included. The TPSI-003 is the vehicle-specific mounting insert.

Does every 2017-onwards D-MAX or MU-X definitely have the correct socket?

Not necessarily. Vehicle trim and console layouts can vary, so the actual accessory-socket position and surrounding panel should be checked before purchase.

Can I install it somewhere else in the dashboard?

The supplied application is specifically based around replacing the right-hand accessory socket in the lower centre front console. A different location may require another switch insert or universal mounting solution.

Is there a bulk version available?

Yes. A bulk pack of 10 switch inserts is available under part number TPSI-003-B.

Is this listing for TPSI-003-B?

No. Unless specifically stated otherwise, this listing refers to one TPSI-003 switch insert.

Should the TPSI-003 be professionally installed?

REDARC recommends installation by a qualified auto electrician or technician.

How do I confirm the TPSI-003 will fit my vehicle?

Confirm the vehicle model and year, inspect the right-hand accessory power socket in the lower centre front console, check the surrounding trim and available rear clearance, and verify that the Tow-Pro remote head can be installed in the correct orientation.

---

🎛️ FACTORY-STYLE TOW-PRO FITMENT FOR SELECTED HOLDEN & ISUZU VEHICLES

Choose the REDARC TPSI-003 when you want a clean and professional mounting solution for a compatible Tow-Pro remote head in a supported Holden Colorado, Isuzu D-MAX or Isuzu MU-X.

With vehicle-specific accessory-socket fitment, a compact 41.8mm × 41.8mm face and an OE-style appearance, the TPSI-003 helps integrate your Tow-Pro control neatly into the vehicle interior.

Complete your Tow-Pro installation with a purpose-designed REDARC switch insert for compatible Holden and Isuzu vehicles.