RWL636FHS 36W LED Work Light | Flood Beam, Switch & Handle

💡 ROADVISION RWL636FHS 36W LED WORK LIGHT – FLOOD BEAM WITH SWITCH & HANDLE

2880 Lumens • 12 × 3W CREE LEDs • Integrated Switch & Handle • IP67 • 10–30V DC

The Roadvision RWL636FHS is a practical, heavy-duty LED work light designed to put lighting control right at the lamp.

Featuring an integrated rear switch and carry/positioning handle, it allows the operator to control when and where light is needed without relying on a remote switch. Producing 2880 lumens from 12 × 3W CREE LEDs, it is well suited to trade, utility, service vehicle and machinery applications.

⚡ KEY FEATURES

💡 2880 Lumen Flood Beam
Provides broad work-area illumination for trade, service and utility applications.

🎛️ Integrated On/Off Switch
A switch built into the rear of the lamp gives you direct control at the light source.

🤝 Integrated Handle
Makes the lamp easier to position and control where directional work lighting is required.

⚙️ 12 × 3W CREE LEDs
Produces bright white LED illumination with a total stated lamp rating of 36W.

🔋 Multi-Volt 10–30V DC
Suitable for compatible 12V and 24V vehicle and machinery electrical systems.

💧 IP67 Water & Dust Protection
Designed for demanding outdoor and mobile environments.

🛡️ Tough Aluminium Housing
Lightweight die-cast aluminium housing combined with a durable polycarbonate lens.

⚡ Electrical Protection
Features over-voltage, under-voltage and reverse-polarity protection.

📻 EMI / EMC Approved
Designed to minimise radio-frequency interference in compatible vehicle electrical systems.

🕒 Up to 50,000 Hour LED Lifespan
Solid-state LED technology is designed for long service life.

🛡️ 5 Year Warranty
Backed by Roadvision's supplied 5-year warranty.

🔦 BUILT FOR HANDS-ON WORK LIGHTING

The RWL636FHS stands apart from a conventional fixed work lamp by incorporating both a rear-mounted switch and integrated handle. This makes it particularly useful where the operator needs convenient local control or regularly adjusts the lamp position.

📋 TECHNICAL SPECIFICATIONS

Part Number: RWL636FHS

Description: 6 Series LED Work Lamp – 36W Flood with Switch & Handle

Beam Type: Flood

Effective Light Output: 2880lm

Total Power: 36W

Light Source: 12 × 3W CREE LEDs

Input Voltage: 10–30V DC

Current Draw @ 13.8V: 1.34A

Lux @ 10m: 26lx

Stated Beam Distance: 102m

Distance @ 1 Lux: 102m

Distance @ 0.5 Lux: 51m

Protection Rating: IP67

Housing: Die-Cast Aluminium

Lens: Polycarbonate

Dimensions: Approximately 145 × 94 × 200mm

Wiring: 300mm Lead

LED Lifespan: Up to 50,000 Hours

Warranty: 5 Years

🚜 IDEAL FOR

• 🛻 Work utes & service vehicles
• 🧰 Tradies & mobile workshops
• 🚜 Agricultural machinery
• 🚚 Trucks & commercial vehicles
• 🏗️ Construction equipment
• 🌙 Night-time work areas
• 🔧 Utility & maintenance applications

❓ QUICK FAQ

Does the RWL636FHS have its own switch?

Yes. An integrated switch is built into the rear of the lamp for direct on/off control.

Is it a spot or flood beam?

It uses a flood beam designed to provide broad work-area illumination.

Can it run on both 12V and 24V systems?

Yes. The specified operating voltage range is 10–30V DC.

Is it weather resistant?

Yes. The lamp is rated IP67, providing dust-tight protection and protection against temporary immersion under the applicable test conditions.

💡 LIGHT WHERE YOU NEED IT – CONTROL RIGHT AT THE LAMP

With 2880 lumens, a broad flood beam, integrated switch and positioning handle, the Roadvision RWL636FHS is a practical work light for tradies, utility vehicles and machinery operating in demanding environments.