🔌 REDARC TPWKIT-013 UNIVERSAL TOW-PRO WIRING KIT
Universal 12V Tow-Pro Elite Installation Kit – 1.8m Power Cable, Encapsulated Protection Device & Modern Driver-Aid Compatibility
⚡ Complete universal wiring solution for installing a compatible REDARC Tow-Pro Elite electric trailer brake controller into a wide range of 12V vehicles.
The REDARC TPWKIT-013 Universal Tow-Pro Wiring Kit is designed to simplify installation of the Tow-Pro Elite EBRH-ACCV3 in compatible vehicles where the start battery, Tow-Pro main unit and cable route into the cabin can be accommodated by the supplied 1.8m power cable.
The kit includes the primary wiring and mounting hardware required for a professional installation, including a Wago Boot, Encapsulated Protection Device, wiring harness, mounting bracket and fitting instructions.
Designed with modern vehicles in mind, the TPWKIT-013 supports installations involving advanced driver-assistance systems such as Autonomous Emergency Braking, Adaptive Cruise Control, lane-departure systems and collision-avoidance technologies where the vehicle brake signal may be generated by multiple electronic systems.
⚡ KEY FEATURES
🔌 Universal Tow-Pro Elite Wiring Kit
Designed to support installation of the REDARC Tow-Pro Elite EBRH-ACCV3 into a broad range of compatible 12V vehicles.
📏 1.8m Power Cable
Suitable where the vehicle start battery, Tow-Pro main unit and cable run to the cabin can be accommodated within the supplied 1.8m power cable length.
🛡️ Encapsulated Protection Device
Supplied pre-installed within the universal wiring system to support correct integration with compatible modern vehicles.
🧰 Complete Installation Hardware
Includes a Wago Boot, Protection Device, wiring harness, mounting bracket and fitting instructions.
🚗 Designed for Modern Vehicle Electronics
Supports compatible installations in vehicles using advanced electronic braking and driver-assistance technologies.
🛑 AEB Compatibility
Designed for suitable vehicles equipped with Autonomous Emergency Braking systems.
🚘 Adaptive Cruise Control Compatibility
Supports installations where braking events may be generated by Adaptive Cruise Control and associated electronic systems.
⚠️ Collision-Avoidance & Lane-Departure Systems
Designed to accommodate modern vehicle systems where braking signals may originate from multiple driver-assistance functions.
🎛️ Supports Remote Head Installation
Works with the Tow-Pro Elite remote-head system for a clean, low-profile dashboard installation.
🔧 Compatible Switch Inserts Available
Can be paired with selected REDARC switch inserts to integrate the Tow-Pro remote head into compatible factory-style dashboard switch locations.
🛡️ 2-Year Warranty
Backed by the supplied REDARC 2-year warranty.
🔧 DESIGNED FOR UNIVERSAL TOW-PRO INSTALLATIONS
The TPWKIT-013 is part of REDARC’s consolidated Universal Tow-Pro Wiring Kit range.
The Universal range replaces the previous broader Tow-Pro wiring-kit range, reducing the number of kits while continuing to support a wide selection of compatible vehicles.
The TPWKIT-013 is intended for installations where the supplied 1.8m power cable is sufficient to route between the start battery, Tow-Pro main unit and vehicle cabin.
⚠️ IMPORTANT: Confirm the cable route and required length before purchase. If your vehicle layout requires a longer or different wiring configuration, another REDARC Tow-Pro wiring kit may be more appropriate.
🛡️ BUILT FOR MODERN DRIVER-ASSISTANCE SYSTEMS
Modern vehicles may generate braking signals from more than the conventional brake-pedal switch.
Systems such as Autonomous Emergency Braking, Adaptive Cruise Control, collision avoidance and other driver-assistance technologies can initiate vehicle braking electronically.
The TPWKIT-013 Universal Tow-Pro Wiring Kit incorporates REDARC’s Encapsulated Protection Device and is designed to support compatible installations where these advanced braking systems must be considered.
- Autonomous Emergency Braking
- Adaptive Cruise Control
- Lane-departure-related driver aids
- Collision-avoidance systems
- Vehicles where brake signals may originate from multiple systems
🧰 COMPLETE INSTALLATION HARDWARE
The TPWKIT-013 provides the major wiring and mounting components required to support installation of a compatible Tow-Pro Elite.
Supplied components include:
- Wago Boot
- Encapsulated Protection Device
- Universal wiring harness
- 1.8m power cable arrangement
- Mounting bracket
- Fitting instructions
This helps reduce the need to source individual wiring and protection components separately.
🎛️ TOW-PRO ELITE REMOTE HEAD CABLE INFORMATION
The standard Tow-Pro Elite EBRH-ACCV3 is supplied with a 1m remote-head cable.
Where the Tow-Pro main unit is positioned around the glovebox area, the standard 1m cable can generally support locating the remote head around the centre area of the vehicle.
If the desired remote-head position is on the driver’s side and the standard cable cannot reach, a 2m remote-head cable may need to be purchased separately.
⚠️ IMPORTANT: Check the proposed location of both the main unit and remote head before installation to determine whether the standard Tow-Pro Elite remote cable is long enough.
🔌 REDARC SWITCH INSERT COMPATIBILITY
REDARC offers a range of switch inserts that can help integrate the Tow-Pro remote head into an existing dashboard switch panel on compatible vehicles.
Available supplied compatibility information includes:
- TPSI-001 – Universal model
- TPSI-002 – Toyota Hilux & Mitsubishi Triton
- TPSI-003 – Holden Colorado
- TPSI-005 – Isuzu D-MAX SX & Mazda BT-50 from 2020 onwards
- TPSI-006 – Isuzu D-MAX & Isuzu MU-X pre-2020
- TPSI-007 – Toyota 70 Series
- TPSI-008 – Nissan Pathfinder R52 from 2013 onwards & Mercedes-Benz X-Class from 2018 onwards
- TPSI-009 – Mazda BT-50 2011–2020
- TPSI-010 – Universal Remote Head Kit
- TPSI-011 – Toyota 2019+ square switch inserts, including 200 & 300 Series applications
⚠️ Switch inserts are not stated as included with the TPWKIT-013 and should be purchased separately where required.
🚙 NOT SUITABLE FOR FORD RANGER & EVEREST
The TPWKIT-013 is not the recommended wiring kit for Ford Ranger and Ford Everest applications.
For compatible Ford Ranger and Ford Everest Tow-Pro installations, refer to the REDARC TPWKIT-012 vehicle-specific wiring kit.
⚠️ IMPORTANT: Do not use TPWKIT-013 as a substitute for TPWKIT-012 in Ford Ranger or Ford Everest applications where the vehicle-specific TPWKIT-012 is required.
🚗 SUITABLE APPLICATIONS
- Compatible 12V passenger vehicles
- Compatible 4WD vehicles
- Compatible utes and light commercial vehicles
- Vehicles with Autonomous Emergency Braking
- Vehicles with Adaptive Cruise Control
- Vehicles with collision-avoidance systems
- Vehicles with modern electronically generated brake signals
- Universal Tow-Pro Elite installations
- Applications where a 1.8m power cable is suitable
⚠️ Ford Ranger and Ford Everest are excluded from the supplied TPWKIT-013 compatibility and should use the appropriate TPWKIT-012 kit.
📐 PRODUCT SPECIFICATIONS
Brand: REDARC
Product: Universal Tow-Pro Wiring Kit
Part number: TPWKIT-013
Application: Universal Tow-Pro Elite installation
Compatible controller: REDARC Tow-Pro Elite EBRH-ACCV3
Voltage rating: 12V
Power cable length: 1.8m
Protection device: Encapsulated Protection Device
Weight: Approximately 0.9kg
Height: Approximately 65mm
Width: Approximately 290mm
Depth / Length: Approximately 290mm
Warranty: 2 Years
Ford Ranger compatibility: No – refer to TPWKIT-012
Ford Everest compatibility: No – refer to TPWKIT-012
📦 WHAT’S INCLUDED?
- 1 × REDARC TPWKIT-013 Universal Tow-Pro Wiring Kit
- Wago Boot
- Encapsulated Protection Device
- Wiring Harness
- 1.8m power cable arrangement
- Mounting Bracket
- Fitting Instructions
⚠️ Tow-Pro Elite brake controller, switch insert and optional 2m remote-head cable are not stated as included and should be purchased separately unless your specific package expressly states otherwise.
⚠️ FITMENT & COMPATIBILITY INFORMATION
Please confirm your vehicle layout, electrical system and Tow-Pro installation requirements before purchasing.
Check the following:
- Vehicle electrical system – 12V
- Brake controller – Tow-Pro Elite EBRH-ACCV3
- Distance from start battery to proposed controller location
- Suitability of the supplied 1.8m power cable
- Location of Tow-Pro main unit
- Remote-head mounting position
- Required remote-head cable length
- Vehicle brake-signal architecture
- Presence of AEB or other driver-assistance systems
- Required dashboard switch insert
- Whether a vehicle-specific Tow-Pro kit is recommended instead
⚠️ IMPORTANT: This kit is rated for compatible 12V vehicle applications.
⚠️ IMPORTANT: The TPWKIT-013 is not compatible with the specified Ford Ranger and Ford Everest applications. Refer to the REDARC TPWKIT-012 instead.
⚠️ Professional installation by a suitably qualified automotive electrician or technician is recommended for trailer brake-controller wiring.
❓ FREQUENTLY ASKED QUESTIONS
What is the REDARC TPWKIT-013?
The TPWKIT-013 is a universal 12V wiring and installation kit designed to support installation of the REDARC Tow-Pro Elite EBRH-ACCV3 into a wide range of compatible vehicles.
Which brake controller is the TPWKIT-013 designed for?
The supplied product information identifies the TPWKIT-013 as supporting installation of the REDARC Tow-Pro Elite electric trailer brake controller.
Is the Tow-Pro Elite included?
No Tow-Pro Elite controller is stated as included with the TPWKIT-013. The brake controller should be purchased separately unless a particular package expressly states otherwise.
What voltage vehicles does the TPWKIT-013 suit?
The supplied specifications list the TPWKIT-013 as a 12V wiring kit.
How long is the power cable?
The supplied power cable length is approximately 1.8m.
How do I know if the 1.8m cable is long enough?
Check the actual cable route between the start battery, Tow-Pro main-unit location and entry into the vehicle cabin. The TPWKIT-013 is intended for installations where those points can be accommodated by the supplied 1.8m cable.
What is the Encapsulated Protection Device?
The Universal Tow-Pro Wiring Kit is supplied with REDARC’s Encapsulated Protection Device pre-installed as part of the wiring arrangement for compatible modern vehicle applications.
Does the kit support vehicles with AEB?
Yes. The supplied product information identifies compatibility with modern driver aids including Autonomous Emergency Braking.
Does it support Adaptive Cruise Control?
Yes. The Universal Tow-Pro Wiring Kit is designed for compatible vehicles where braking events may be generated by systems such as Adaptive Cruise Control.
What other driver-assistance systems are supported?
The supplied information references lane departure, collision avoidance and other systems where the brake signal may be generated by different vehicle systems.
Can I use the TPWKIT-013 on a Ford Ranger?
No. The supplied compatibility information states that the TPWKIT-013 is not compatible with Ford Ranger. Refer to the REDARC TPWKIT-012.
Can I use the TPWKIT-013 on a Ford Everest?
No. Ford Everest applications covered by the supplied information should use the REDARC TPWKIT-012 instead.
What is included in the TPWKIT-013?
The supplied kit includes a Wago Boot, Encapsulated Protection Device, wiring harness, mounting bracket and fitting instructions.
Does the kit include a mounting bracket?
Yes. A mounting bracket is included.
Does it include fitting instructions?
Yes. Fitting instructions are supplied with the kit.
Does the kit include a switch insert?
No switch insert is stated as included. Compatible REDARC switch inserts are available separately for selected vehicles.
Which switch insert suits a Toyota Hilux?
The supplied compatibility information identifies TPSI-002 for compatible Toyota Hilux and Mitsubishi Triton applications.
Which switch insert suits a Holden Colorado?
TPSI-003 is listed for compatible Holden Colorado applications.
Which switch insert suits an Isuzu D-MAX?
TPSI-005 is listed for applicable Isuzu D-MAX SX applications, while TPSI-006 is listed for applicable pre-2020 Isuzu D-MAX and MU-X vehicles.
Which switch insert suits a Toyota 70 Series?
The supplied compatibility information identifies TPSI-007 for compatible Toyota 70 Series applications.
Which switch insert suits a Mazda BT-50?
TPSI-009 is listed for Mazda BT-50 models from 2011–2020, while TPSI-005 is listed for applicable Mazda BT-50 models from 2020 onwards.
Which switch insert suits a Nissan Pathfinder R52?
TPSI-008 is listed for compatible Nissan Pathfinder R52 models from 2013 onwards.
Which switch insert suits a Mercedes-Benz X-Class?
TPSI-008 is listed for compatible Mercedes-Benz X-Class applications from 2018 onwards.
What is TPSI-010?
TPSI-010 is identified as a Universal Remote Head Kit.
Which insert suits newer Toyota square switch openings?
TPSI-011 is listed for compatible Toyota 2019+ square switch inserts, including applicable 200 Series and 300 Series vehicles.
Will the standard Tow-Pro Elite remote-head cable reach the driver’s side?
That depends on the main-unit location and vehicle layout. The standard Tow-Pro Elite includes a 1m remote-head cable, which may support a central remote-head position when the main unit is mounted around the glovebox area. A separately available 2m cable may be required for some driver-side installations.
Does the TPWKIT-013 include the 2m remote-head cable?
No 2m remote-head cable is stated as included. It should be purchased separately where required.
Why use a REDARC Tow-Pro Wiring Kit?
The kit combines the required wiring, protection and mounting hardware into a purpose-designed installation package, helping create a quicker and more consistent Tow-Pro Elite installation.
What does the TPWKIT-013 weigh?
The supplied specification lists a weight of approximately 0.9kg.
What are the supplied package dimensions?
The supplied specifications list approximately 290mm wide, 290mm long/deep and 65mm high.
What warranty does the TPWKIT-013 have?
The supplied product information lists a 2-year warranty.
Should the TPWKIT-013 be professionally installed?
Professional installation is recommended because trailer brake-controller wiring is a safety-critical part of the towing system and must be correctly integrated with the vehicle’s electrical and braking systems.
How do I know if TPWKIT-013 is the correct kit for my vehicle?
Confirm that the vehicle is a compatible 12V application, that the Tow-Pro Elite EBRH-ACCV3 is being installed, that the supplied 1.8m power cable suits the proposed wiring route, and that the vehicle is not a Ford Ranger or Ford Everest application requiring TPWKIT-012.
🔌 UNIVERSAL TOW-PRO ELITE INSTALLATION FOR MODERN 12V VEHICLES
Choose the REDARC TPWKIT-013 when you need a comprehensive universal wiring solution for installing a Tow-Pro Elite into a compatible 12V vehicle.
With a 1.8m power cable, Encapsulated Protection Device, wiring harness, Wago Boot, mounting bracket and support for modern driver-assistance systems, the TPWKIT-013 provides a practical foundation for a clean and professional Tow-Pro Elite installation.
Pair your Tow-Pro Elite with the correct REDARC wiring hardware for dependable trailer brake-controller integration.
